商品説明
概要The MX0109A InfiniiMax III extreme temperature solder-in head is a semi-permanent solder-in connection that provides up to 26 GHz of system bandwidth. For extended temperature testing, the MX0109A supports extreme operating temperature of -55 °C to +150 °C per JEDEC JESD22-A104 revision E, making it ideal for testing electronics circuits and devices in environmental chambers.
Compatible with InfiniiMax III and III+ probe amp
The 130 ohm axial resistors at the tip of the MX0109A ZIF tip can be replaced when they are worn out or damaged.
The replacement axial resistor kit for the MX0109A, N2836A and N2838A is N2836-68701. Each resistor kit contains 10 resistors.
Operating temperature characteristics
-55°C dwell, 1000 hours minimum
+150°C dwell, 1000 hours minimum
-55°C to 150°C cycles, 750 cycles minimum per JEDEC JESD22-A104 revision E
Use the N5450B extreme temperature extension cable to extend the cable length inside the chamber.
Note: The MX0109A is replacing the N2836A.
商品スペック
>>もっと見る主な特長と仕様
26 GHz bandwidth (with InfiniiMax III N2803A amp)
Cdiff = 108 fF, Cse = 140 fF
100kΩ input Rdiff (@ DC), 1kΩ input Rdiff (@ >10kHz)
6:1 attenuation ratio, normal sensitivity
Variable spacing from 5 mil – 250 mil (or 0.127 mm – 6.35 mm)
Extreme operating temperature of -55 °C to +150 °C per JEDEC JESD22-A104 revision E
関連資料ダウンロード
関連資料をダウンロードいただくには
プレミアム会員(無料)とメルマガ購読の登録が必要です。
【プレミアム会員の方】
ログイン後、プロフィール編集画面よりメルマガ購読欄を
「購読する」に変更をお願いします。
【メルマガ会員の方】
ログイン後、プレミアム会員への移行&メルマガ購読の
手続きをお願いします。
【非会員の方】
プレミアム会員への登録&メルマガ購読の手続きをお願いします。
レビュー
レビュー投稿へのご協力をよろしくお願いいたします。